The following commands are available:
Tag | Description |
---|---|
reload-config | |
This should cause racoon(8) to reload its configuration file. This seems completely broken at the time this man page is written. | |
show-schedule | |
Unknown command. | |
show-sa [isakmp|esp|ah|ipsec] | |
Dump the SA: All the SAs if no SA class is provided, or either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec SAs. Use -l to increase verbosity. | |
flush-sa [isakmp|esp|ah|ipsec] | |
is used to flush all SAs if no SA class is provided, or a class of SAs, either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec SAs. | |
[-u username saopts] | |
Establish an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA.
The optional
-u username
can be used when establishing an ISAKMP SA while hybrid auth is in use.
racoonctl
will prompt you for the password associated with
username
and these credentials will be used in the Xauth exchange.
saopts has the following format: | |
isakmp {inet|inet6} src dst
{esp|ah} {inet|inet6} src/prefixlen/port dst/prefixlen/port | |
{icmp|tcp|udp|any} |
Tag | Description |
---|---|
[-u username vpn_gateway] | |
This is a particular case of the previous command. It will establish an ISAKMP SA with vpn_gateway. | |
delete-sa saopts | |
Delete an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA. | |
vpn-disconnect vpn_gateway | |
This is a particular case of the previous command. It will kill all SAs associated with vpn_gateway. | |
show-event [-l] | |
Dump all events reported by racoon(8), then quit. The -l flag causes racoonctl to not stop once all the events have been read, but rather to loop awaiting and reporting new events. |
Command shortcuts are available:
Tag | Description |
---|---|
rc | reload-config |
ss | show-sa |
sc | show-schedule |
fs | flush-sa |
ds | delete-sa |
es | establish-sa |
vc | vpn-connect |
vd | vpn-disconnect |
se | show-event |
Tag | Description |
---|---|
/var/racoon/racoon.sock or
/var/run/racoon.sock | |
racoon(8) control socket. |
Advertisements |