irpsion5 Command in Linux

---

---

The irpsion5 command in Linux enables communication between Psion Series 5 devices through infrared. The Psion Series 5 is a PDA that uses its own proprietary EPOC operating system. The irpsion5 command allows Linux systems to establish an IrDA connection and transfer data with these devices.

Table of Contents

Here is a comprehensive guide to the options available with the irpsion5 command −

• Installation of irpsion5 Command
• Syntax of irpsion5 Command
• irpsion5 Command Options
• Examples of irpsion5 Command in Linux

Note − The irpsion5 command in the irda-utils package enables IrDA connectivity between Linux and a Psion Series 5 PDA. Although it remains functional, it is outdated, with limited updates and minimal support in modern systems, as infrared communication becomes less common. No official deprecation notice exists, but its use may eventually be phased out due to declining IrDA support on newer devices. However, it is important to note that IrDA support has become obsolete in many modern devices, making this command less relevant.

Installation of irpsion5 Command

The irpsion5 command is a part of the irda-utils package, which must be installed before using it. To install the irda-utils package, follow the instructions given below.

To install the irda-utils package on Ubuntu, Kali Linux, Debian, and other Debian-based distributions, use the command given below −

sudo apt install irda-utils

To install it on Fedora, use the following command −

sudo dnf install irda-utils

To check the availability of the irpsion5 command, use the following command −

which irpsion5

If the output shows the irpsion5 command binary path, the command is installed on Linux.

Syntax of irpsion5 Command

The syntax of the irpsion5 command is as follows −

irpsion5 [options]

The [options] field is used to specify various parameters for file transfer, connection settings, and debugging.

irpsion5 Command Options

The options of the irpsion5 command are listed below −

Examples of irpsion5 Command in Linux

This section demonstrates the usage irpsion5 command in Linux with examples −

Sending Files to the Psion Device

To send a file, use the -s options with the file name. For example, to send the test.txt file, use the following command −

sudo irpsion5 -s test.txt

Receiving a File from the Psion Device

To receive a file, use the -r option −

sudo irpsion5 -r

The file will be saved in the current working directory.

Receiving Multiple Files from the Psion Device

To receive a batch of files from the Psion device, use the -b option with irpsion5 command −

sudo irpsion5 -b

Setting Discovery Time Slot

The default discovery time slot is 120ms. To set the custom discovery time slot, use the -S option with the time in milliseconds.

sudo irpsion5 -S 40

Getting Verbose Output

To get the verbose output, use the -v option −

sudo irpsion5 -v -b

Setting Debug Level

To set the debug level, use the -D option with the debug level number. For instance, to set the debug level 2 while receiving the batch of files, use the following command −

sudo irpsion5 -b -D 2

Conclusion

The irpsion5 command enables IrDA connectivity between Linux systems and Psion Series 5 PDAs, supporting file transfers with options for timeouts, verbosity, and batch handling. Although still functional, irpsion5 is outdated due to the decline of infrared technology, with minimal updates and support on modern systems.

In this tutorial, we explained the irpsion5 command, its installation, syntax, options, and usage in Linux with examples.