bccmd - Unix, Linux Command
NAME
bccmd - Utility for the CSR BCCMD interface
SYNOPSIS
bccmd
bccmd [-t <transport>] [-d <device>] <command> [<args>]
bccmd [-h --help] DESCRIPTION
bccmd
issues BlueCore commands to
Cambridge Silicon Radio
devices. If run without the <command> argument, a short help page will be displayed.
OPTIONS
| Tag | Description |
|---|
|
-t <transport> |
| |
Specify the communication transport. Valid options are:
| Tag | Description |
|---|
|
HCI |
Local device with Host Controller Interface (default).
|
|
USB |
Direct USB connection.
|
|
BCSP |
Blue Core Serial Protocol.
|
|
H4 |
H4 serial protocol.
|
|
3WIRE |
3WIRE protocol (not implemented).
|
|
| Tag | Description |
|---|
|
-d <dev> |
Specify a particular device to operate on. If not specified, default is the first available HCI device
or /dev/ttyS0 for serial transports.
|
COMMANDS
| Tag | Description |
|---|
|
builddef |
| |
Get build definitions
|
|
keylen <handle> |
| |
Get current crypt key length
|
|
clock |
Get local Bluetooth clock
|
|
rand |
Get random number
|
|
buildname |
| |
Get the full build name
|
|
panicarg |
| |
Get panic code argument
|
|
faultarg |
| |
Get fault code argument
|
|
coldreset |
| |
Perform cold reset
|
|
warmreset |
| |
Perform warm reset
|
|
disabletx |
| |
Disable TX on the device
|
|
enabletx |
| |
Enable TX on the device
|
|
singlechan <channel> |
| |
Lock radio on specific channel
|
|
hoppingon |
| |
Revert to channel hopping
|
|
rttxdata1 <decimal freq MHz> <level> |
| |
TXData1 radio test
|
|
memtypes |
| |
Get memory types
|
|
psget [-r] [-s <stores>] <key> |
| |
Get value for PS key.
-r sends a warm reset afterwards
|
|
psset [-r] [-s <stores>] <key> <value> |
| |
Set value for PS key.
-r sends a warm reset afterwards
|
|
psclr [-r] [-s <stores>] <key> |
| |
Clear value for PS key.
-r sends a warm reset afterwards
|
|
pslist [-r] [-s <stores>] |
| |
List all PS keys.
-r sends a warm reset afterwards
|
|
psread [-r] [-s <stores>] |
| |
Read all PS keys.
-r sends a warm reset afterwards
|
|
psload [-r] [-s <stores>] <file> |
| |
Load all PS keys from PSR file.
-r sends a warm reset afterwards
|
|
pscheck [-r] [-s <stores>] <file> |
| |
Check syntax of PSR file.
-r sends a warm reset afterwards
|
KEYS
bdaddr country devclass keymin keymax features commands version
remver hciextn mapsco baudrate hostintf anafreq anaftrim usbvid
usbpid dfupid bootmode
AUTHORS
Written by Marcel Holtmann <
marcel@holtmann.org>,
man page by Adam Laurie <
adam@algroup.co.uk>
|
