Just-In-Time Manufacturing (JIT)
Just-in-time manufacturing was a concept introduced to the United States by the Ford motor company. It works on a demand-pull basis, contrary to hitherto used techniques which worked on a production-push basis.
To elaborate further, under just-in-time manufacturing (colloquially referred to as JIT production systems), actual orders dictate what should be manufactured, so that the exact quantity is produced at the exact time it is required.
Just-in-time manufacturing goes hand in hand with concepts such as Kanban, continuous improvement and total quality management (TQM).
Just-in-time production requires intricate planning, in terms of procurement policies and the manufacturing process, if its implementation is to be a success.
Highly advanced technological support systems provide the necessary back-up that Just-in-time manufacturing demands, with production scheduling software and electronic data interchange being the most sought after.
Advantages Just-In-Time Systems
Following are the advantages of Adopting Just-In-Time Manufacturing Systems:
Just-in-time manufacturing keeps stock holding costs to a bare minimum. The release of storage space results in better utilization of space and thereby bears a favorable impact on the rent paid and on any insurance premiums that would otherwise need to be made.
Just-in-time manufacturing eliminates waste, as out-of-date or expired products; do not enter into this equation at all.
As under this technique, only essential stocks are obtained, less working capital is required, to finance procurement. Here, a minimum re-order level is set, and only once that mark is reached fresh stocks are ordered, making this a boon to inventory management too.
Due to the afore-mentioned low level of stocks held, the organizations return on investment (referred to as ROI, in management parlance) would generally be high.
As just-in-time production works on a demand-pull basis, all goods made would be sold, and thus it incorporates changes in demand with surprising ease. This makes it especially appealing today, where the market demand is volatile and somewhat unpredictable.
Just-in-time manufacturing encourages the .right first time. concept, so that inspection costs and cost of rework is minimized.
High quality products and greater efficiency can be derived from following a just-in-time production system.
Close relationships are fostered along the production chain under a just-in-time manufacturing system.
Constant communication with the customer results in high customer satisfaction.
Over production is eliminated, when just-in-time manufacturing is adopted.
Following are the disadvantages of Adopting Just-In-Time Manufacturing Systems:
Just-in-time manufacturing provides zero tolerance for mistakes, as it makes re-working very difficult in practice, as inventory is kept to a bare minimum.
There is a high reliance on suppliers, whose performance is generally outside the purview of the manufacturer.
Due to there being no buffers for delays, production downtime and line idling can occur, which would bear a detrimental effect on finances and on the equilibrium of the production process.
The organization would not be able to meet an unexpected increase in orders, due to the fact that there are no excess finish goods.
Transaction costs would be relatively high, as frequent transactions would be made.
Just-in-time manufacturing may have certain detrimental effects on the environment, due to the frequent deliveries that would result in increased use of transportation which in turn would consume more fossil fuels.
Following are the things to Remember When Implementing a Just-In-Time Manufacturing System:
Management buy-in and support at all levels of the organization are required; if a just-in-time manufacturing system is to be successfully adopted.
Adequate resources should be allocated, so as to obtain technologically advanced software, that is generally required if a just-in-time system is to be a success.
Building a close, trusting relationship with reputed and time-tested suppliers will minimize unexpected delays in the receipt of inventory.
Just-in-time manufacturing cannot be adopted overnight. It requires commitment in terms of time and adjustments to corporate culture would be required, as it is starkly different to traditional production processes.
The design flow process needs to be redesigned and layouts need to be re-formatted, so as to incorporate just-in-time manufacturing.
Lot sizes need to be minimized.
Work station capacity should be balanced whenever possible.
Preventive maintenance should be carried out, so as to minimize machine breakdowns.
Set up times should be reduced wherever possible.
Quality enhancement programs should be adopted, so that total quality control practices can be adopted.
Reduction in lead times and frequent deliveries should be incorporated.
Motion waste should be minimized, so the incorporation of conveyor belts might prove to be a good idea when implementing a just-in-time manufacturing system.
Just-in-time manufacturing is a philosophy that has been successfully implemented in many manufacturing organizations.
It is an optimal system that reduces inventory whilst being increasingly responsive to customer needs, This is not to say that it is not without its pitfalls.
However, these disadvantages can be overcome, with a little forethought and a lot of commitment at all levels of the organization.