Data Structure
Networking
RDBMS
Operating System
Java
MS Excel
iOS
HTML
CSS
Android
Python
C Programming
C++
C#
MongoDB
MySQL
Javascript
PHP
To retrieve the Azure Virtual Network (vNet) or subnet name, we need the first name of the network interface of the VM. Below is the command to retrieve the name of the network interface.$vm = Get-AzVM -VMName Testmachine2k16TestMachine2k16 is the Azure VM name. Assuming this VM has a single NIC attached.PS C:\> $nic = $vm.NetworkProfile.NetworkInterfaces PS C:\> $networkinterface = ($nic.id -split '/')[-1] PS C:\> $networkinterface testmachine2k16619So our NIC name is stored inside the $NetworkInterface variable.If you have the multiple NICs attached, then use the below command to retrieve the NIC details.$nics = $vm.NetworkProfile.NetworkInterfaces foreach($nic in $nics) { ($nic.Id -split ... Read More
To retrieve the Azure VM NIC using PowerShell, we need to first get the VM details. For this example, we have the VM name “TestMachine2k16”. To retrieve the VM details use the Get-AzVM command but before that make sure you are connected to the Azure Account using PowerShell session.PS C:\> $vm = Get-AzVM -VMName Testmachine2k16VM NIC information is stored inside the NetworkProfile property.PS C:\> $vm.NetworkProfileThis will retrieve all the NICs attached to the VM. If there are multiple NICs then we need to store the nic information into the array and have to perform some string operation to get the ... Read More
To install the MSI package using DSC, we need to use the DSC resource “Package”. Let see which properties are available for this resource.PS C:\> Get-DscResource -Name Package | Select -ExpandProperty Properties Name PropertyType IsMandatory Values ---- ------------ ----------- ------ Name [string] True {} Path [string] True {} ProductId [string] True {} Arguments [string] False {} Credential [PSCredential] False {} DependsOn [string[]] False {} Ensure [string] False {Absent, Present} LogPath [string] False {} PsDscRunAsCredential [PSCredential] False {} ReturnCode [UInt32[]] False {}Name, Path, and ProductID parameters are mandatory for this DSC resource.The best way to retrieve the above details is ... Read More
To get the IIS application pool names using PowerShell, you need to use the IIS PSDrive but for that, we need the IIS PowerShell module WebAdministration or IISAdministration on the server we are running the command.If the WebAdministration module is already installed, use the below command to import the module.Import-Module WebAdministration -VerboseOnce you Import the above module, you can see the IIS PSDrive will be activated in the current session.To get all the application Pools run the below command, Get-ChildItem IIS:\AppPools\OutputName State Applications ---- ... Read More
All the new user profiles are created on the windows system at the path,'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\'To retrieve all the user profiles, we can usegci 'HKLM:\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\' | ForEach-Object { $_.GetValue('ProfileImagePath') }ProfileImagePath property shows the location of the user profiles.Another way to retrieve the User Profile is using WMI.PS C:\> gwmi win32_userprofile |Select -ExpandProperty LocalPathOutputC:\Users\.NET v2.0 Classic C:\Users\.NET v4.5 Classic C:\Users\.NET v2.0 C:\Users\.NET v4.5 C:\Users\Classic .NET AppPool C:\Users\Administrator.AUTOMATIONLAB C:\Users\delta
To get the IIS application Pool to recycle settings using GUI, you need to check the Application pool advanced settings.To retrieve the above settings using PowerShell, we can use the Get-IISAppPool command with the specific application pool name. We have the application pool, DefaultAppPool and we need to retrieve its Recycling settings.PS C:\> (Get-IISAppPool -Name DefaultAppPool).RecyclingOutputBelow settings will be for the Periodic restart.PS C:\> (Get-IISAppPool -Name DefaultAppPool).Recycling.PeriodicRestartOutputMemory : 0 PrivateMemory : 102400 Requests : 0 Schedule : {add} Time : 1.05:00:00 Attributes ... Read More
Using GUI from the IIS Manager, you can get the Application Pool Failure settings using App pool advanced settings from the Rapid-Fail Protection section as shown below.To retrieve the above settings using PowerShell, (Get-IISAppPool -Name DefaultAppPool).failureTo run the above command we need the IISAdministration module. You can retrieve the same settings using the WebAdministration module and using IIS PSDrive.(Get-ItemProperty IIS:\AppPools\DefaultAppPool\).failureTo retrieve the specific settings like Failure Interval or Maximum failures, use the below command.Failure Intervals, PS C:\> (Get-IISAppPool -Name DefaultAppPool).failure.rapidFailProtectionInterval Days : 0 Hours : 0 Minutes ... Read More
From the GUI, to retrieve the Application Pool queue length you need to check the Advanced Settings of the Application Pool.To get the IIS application Pool queue length using PowerShell, first, we need to the application pool name. There are two ways (and maybe others) to retrieve once we have the name of the application pool.For example, we need to retrieve the queue length for the application pool DefaultAppPool.(Get-IISAppPool -Name DefaultAppPool).queuelengthTo run the above command, you need the IISAdministration Module. You can also use the IIS PS drive but for that WebAdministration module should be loaded.(Get-ItemProperty IIS:\AppPools\DefaultAppPool).queuelengthRead More
writeJson() writes an object to a JSON file by parsing.SyntaxwriteJson(file, object[, options] [, callback])Parametersfile – String parameter which will contain name and location of the JSON file.object – Object passed into the writeJson function.options – The 'outputFile' function supports the following options −spaces – The number of spaces will be passed in this parameter for indentation.EOL – Setting the 'end of line' character, Default is ''.replacer – It takes two parameters – key and value. Will replace If key found, the value will be replaced by the given value.callback – This function will give a callback if any error occurs.Example 1Check that fs-extra is installed before proceeding; ... Read More
Introduction to values()This function returns an iterator that allows us to iterate all over the values that are present in that object. It basically gives us a tool to select or iterate the values and then perform functions on them.SyntaxURLSearchParams.values();It will return an ES6 type iterator with the name-value pair over all the values.Example// Defining the parameters as a constant var params = new URLSearchParams( 'key1=value1&key2=value2&key3=value3'); // Iterating over the values of params for(var value of params.values()) { console.log(value); }Outputvalue1 value2 value3Example// Defining the URL as a constant const params = new URLSearchParams('name=John&age=21'); // Iterating over the ... Read More