EasyMock - Expecting Calls

EasyMock provides a special check on the number of calls that can be made on a particular method. Suppose MathApplication should call the CalculatorService.serviceUsed() method only once, then it should not be able to call CalculatorService.serviceUsed() more than once.

//add the behavior of calc service to add two numbers and serviceUsed.
EasyMock.expect(calcService.add(10.0,20.0)).andReturn(30.00);
calcService.serviceUsed();

//limit the method call to 1, no less and no more calls are allowed
EasyMock.expectLastCall().times(1);

Create CalculatorService interface as follows.

File: CalculatorService.java

public interface CalculatorService {
   public double add(double input1, double input2);
   public double subtract(double input1, double input2);
   public double multiply(double input1, double input2);
   public double divide(double input1, double input2);
   public void serviceUsed();
}

Example with calcService.serviceUsed() called once

Step 1: Create an interface called CalculatorService to provide mathematical functions

File: CalculatorService.java

public interface CalculatorService {
   public double add(double input1, double input2);
   public double subtract(double input1, double input2);
   public double multiply(double input1, double input2);
   public double divide(double input1, double input2);
   public void serviceUsed();
}

Step 2: Create a JAVA class to represent MathApplication

File: MathApplication.java

public class MathApplication {
   private CalculatorService calcService;
   public void setCalculatorService(CalculatorService calcService){
      this.calcService = calcService;
   }
   public double add(double input1, double input2){		
      calcService.serviceUsed();
      return calcService.add(input1, input2);		
   }
   public double subtract(double input1, double input2){
      return calcService.subtract(input1, input2);
   }
   public double multiply(double input1, double input2){
      return calcService.multiply(input1, input2);
   }
   public double divide(double input1, double input2){
      return calcService.divide(input1, input2);
   }
}

Step 3: Test the MathApplication class

Let's test the MathApplication class, by injecting in it a mock of calculatorService. Mock will be created by EasyMock.

File: MathApplicationTester.java

import org.easymock.EasyMock;
import org.easymock.EasyMockRunner;
import org.easymock.Mock;
import org.easymock.TestSubject;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
import org.junit.runner.RunWith;

// @RunWith attaches a runner with the test class to initialize the test data
@RunWith(EasyMockRunner.class)
public class MathApplicationTester {
   // @TestSubject annotation is used to identify class which is going to use the mock object
   @TestSubject
   MathApplication mathApplication = new MathApplication();

   // @Mock annotation is used to create the mock object to be injected
   @Mock
   CalculatorService calcService;

   @Test
   public void testAdd(){
      //add the behavior of calc service to add two numbers
      EasyMock.expect(calcService.add(10.0,20.0)).andReturn(30.00);
      calcService.serviceUsed();
      EasyMock.expectLastCall().times(1);
      
      //activate the mock
      EasyMock.replay(calcService);	
		
      //test the add functionality
      Assert.assertEquals(mathApplication.add(10.0, 20.0),30.0,0);

      //verify call to calcService is made or not
      EasyMock.verify(calcService);
   }
}

Step 4: Execute test cases

Create a java class file named TestRunner in C:\> EasyMock_WORKSPACE to execute Test case(s).

File: TestRunner.java

import org.junit.runner.JUnitCore;
import org.junit.runner.Result;
import org.junit.runner.notification.Failure;

public class TestRunner {
   public static void main(String[] args) {
      Result result = JUnitCore.runClasses(MathApplicationTester.class);
      for (Failure failure : result.getFailures()) {
         System.out.println(failure.toString());
      }
      System.out.println(result.wasSuccessful());
   }
}

Step 5: Verify the Result

Compile the classes using javac compiler as follows −

C:\EasyMock_WORKSPACE>javac Calculator Service.java Math Application.java Math Application Tester.java Test Runner.java

Now run the Test Runner to see the result −

C:\EasyMock_WORKSPACE>java TestRunner

Output

Verify the output.

true

Example with calcService.serviceUsed() Called Twice

Step 1: Create an interface CalculatorService to provide mathematical functions.

File: CalculatorService.java

public interface CalculatorService {
   public double add(double input1, double input2);
   public double subtract(double input1, double input2);
   public double multiply(double input1, double input2);
   public double divide(double input1, double input2);
   public void serviceUsed();
}

Step 2: Create a JAVA class to represent MathApplication.

File: MathApplication.java

public class MathApplication {
   private CalculatorService calcService;
   public void setCalculatorService(CalculatorService calcService){
      this.calcService = calcService;
   }
   public double add(double input1, double input2){		
      calcService.serviceUsed();
      calcService.serviceUsed();
      return calcService.add(input1, input2);		
   }
   public double subtract(double input1, double input2){
      return calcService.subtract(input1, input2);
   }
   public double multiply(double input1, double input2){
      return calcService.multiply(input1, input2);
   }
   public double divide(double input1, double input2){
      return calcService.divide(input1, input2);
   }
}

Step 3: Test the MathApplication class

Let's test the MathApplication class, by injecting in it a mock of calculatorService. Mock will be created by EasyMock.

File: MathApplicationTester.java

import org.easymock.EasyMock;
import org.easymock.EasyMockRunner;
import org.easymock.Mock;
import org.easymock.TestSubject;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
import org.junit.runner.RunWith;

// @RunWith attaches a runner with the test class to initialize the test data
@RunWith(EasyMockRunner.class)
public class MathApplicationTester {
   // @TestSubject annotation is used to identify class which is going to use the mock object
   @TestSubject
   MathApplication mathApplication = new MathApplication();

   //@Mock annotation is used to create the mock object to be injected
   @Mock
   CalculatorService calcService;
	
   @Test
   public void testAdd(){
      //add the behavior of calc service to add two numbers
      EasyMock.expect(calcService.add(10.0,20.0)).andReturn(30.00);
      calcService.serviceUsed();
      EasyMock.expectLastCall().times(1);
      
      //activate the mock
      EasyMock.replay(calcService);	
		
      //test the add functionality
      Assert.assertEquals(mathApplication.add(10.0, 20.0),30.0,0);

      //verify call to calcService is made or not
      EasyMock.verify(calcService);
   }
}

Step 4: Execute test cases

Create a java class file named TestRunner in C:\> EasyMock_WORKSPACEto execute Test case(s).

File: TestRunner.java

import org.junit.runner.JUnitCore;
import org.junit.runner.Result;
import org.junit.runner.notification.Failure;

public class TestRunner {
   public static void main(String[] args) {
      Result result = JUnitCore.runClasses(MathApplicationTester.class);
      for (Failure failure : result.getFailures()) {
         System.out.println(failure.toString());
      }
      System.out.println(result.wasSuccessful()); 
   }
}

Step 5: Verify the Result

Compile the classes using javac compiler as follows −

C:\EasyMock_WORKSPACE>javac CalculatorService.java MathApplication.java MathApplicationTester.java TestRunner.java

Now run the Test Runner to see the result −

C:\EasyMock_WORKSPACE>java TestRunner

Output

Verify the output.

testAdd(com.tutorialspoint.mock.MathApplicationTester):  
   Unexpected method call CalculatorService.serviceUsed():
      CalculatorService.add(10.0, 20.0): expected: 1, actual: 0
      CalculatorService.serviceUsed(): expected: 1, actual: 2
false

Example without Calling calcService.serviceUsed()

Step 1: Create an interface Calculator Service to provide mathematical functions

File: CalculatorService.java

public interface CalculatorService {
   public double add(double input1, double input2);
   public double subtract(double input1, double input2);
   public double multiply(double input1, double input2);
   public double divide(double input1, double input2);
   public void serviceUsed();
}

Step 2: Create a JAVA class to represent MathApplication

File: MathApplication.java

public class MathApplication {
   private CalculatorService calcService;
   public void setCalculatorService(CalculatorService calcService){
      this.calcService = calcService;
   }
   public double add(double input1, double input2){		
      return calcService.add(input1, input2);		
   }
   public double subtract(double input1, double input2){
      return calcService.subtract(input1, input2);
   }
   public double multiply(double input1, double input2){
      return calcService.multiply(input1, input2);
   }
   public double divide(double input1, double input2){
      return calcService.divide(input1, input2);
   }
}

Step 3: Test the MathApplication class

Let's test the MathApplication class, by injecting in it a mock of calculatorService. Mock will be created by EasyMock.

File: MathApplicationTester.java

import org.easymock.EasyMock;
import org.easymock.EasyMockRunner;
import org.easymock.Mock;
import org.easymock.TestSubject;
import org.junit.Assert;
import org.junit.Before;
import org.junit.Test;
import org.junit.runner.RunWith;

// @RunWith attaches a runner with the test class to initialize the test data
@RunWith(EasyMockRunner.class)
public class MathApplicationTester {
   // @TestSubject annotation is used to identify class which is going to use the mock object
   @TestSubject
   MathApplication mathApplication = new MathApplication();

   //@Mock annotation is used to create the mock object to be injected
   @Mock
   CalculatorService calcService;

   @Test
   public void testAdd(){
      //add the behavior of calc service to add two numbers
      EasyMock.expect(calcService.add(10.0,20.0)).andReturn(30.00);
      calcService.serviceUsed();
      EasyMock.expectLastCall().times(1);
      
      //activate the mock
      EasyMock.replay(calcService);	
		
      //test the add functionality
      Assert.assertEquals(mathApplication.add(10.0, 20.0),30.0,0);

      //verify call to calcService is made or not
      EasyMock.verify(calcService);
   }
}

Step 4: Execute test cases

Create a java class file named TestRunner in C:\> EasyMock_WORKSPACE to execute Test case(s).

File: TestRunner.java

import org.junit.runner.JUnitCore;
import org.junit.runner.Result;
import org.junit.runner.notification.Failure;

public class TestRunner {
   public static void main(String[] args) {
      Result result = JUnitCore.runClasses(MathApplicationTester.class);
      for (Failure failure : result.getFailures()) {
         System.out.println(failure.toString());
      }
      System.out.println(result.wasSuccessful());
   }
}

Step 5: Verify the Result

Compile the classes using javac compiler as follows −

C:\EasyMock_WORKSPACE>javac Calculator Service.java Math Application.java Math Application Tester.java Test Runner.java

Now run the Test Runner to see the result −

C:\EasyMock_WORKSPACE>java TestRunner

Output

Verify the output.

testAdd(com.tutorialspoint.mock.MathApplicationTester): 
   Expectation failure on verify:
      CalculatorService.serviceUsed(): expected: 1, actual: 0
false
Advertisements