Learn Current Electricity in depth & Basics of DC Circuits
Learn Current electricity & simulation of Electrical circuits recommended for Electrical & Electronics Engineers
Updated on Sep, 2023
Language - English
I had divided this course into two parts. In the first part, you will be learning some basic concepts of current electricity in great depth and an introduction to thinkercad software. After completing 1st part you will start 2nd part and in that, you will be learning the complex circuitry and its simulation on the thinkercad software. I will not only teach you the traditional methods to solve the complex circuitry but at the same time, I will also provide you some shortcut tricks which help you to solve that circuit quickly.
Part-1:- Current Electricity and introduction to the Thinkercad software
1) Difference between conductors and insulators
2) What is a current?
3) What is a resistor and how to find its value?
4) What is Voltage?
5) What is power and how we can calculate it?
6) Difference between Ac and Dc Circuits?
7) Ohm's Law with experiment
8) Series and Parallel circuits + Numericals
After lecture 7th you will be introduced to the thinkercad software.
Part-2:- Electrical Circuits and its simulation in Thinkercad software
1) What are nodes meshes and loops?
2) KVL and KCL rule
3) Mesh analysis
4) Supermesh analysis
5) Nodal analysis
6) Voltage and Current divider rule
7) Thevenin's Law
8) Norton's Law
Simulation on Thinkercad Software
What will you learn in this course:
In part 1 you will learn some basic concepts of current electricity like current, voltage, resistor, etc along with introduction to Thinkercad software.
In part 2 you will learn different techniques to solve complex circuits along with simulation of that circuits on the thinkercad software
Network Theory concepts (Mesh, super-mesh, Nodal analysis, Voltage and current divider techniques, Thevenin's and Norton's theorem)
Simulation of different circuits on Thinkercad software
You will learn to operate voltmeter, ammeter and multimeter
You will learn how to measure voltage and current of any circuit and resistance of any resistor
You will learn how to generate different ac signals like Sine wave, Square wave and Triangular wave
You will be able to convert any complex circuit into it's simple form
What are the prerequisites for this course?
- Decent connection of the internet.
- Pc or Laptop to simulate the circuits on the Thinkercad software.
- Basic algebra for mathematical calculations or scientific calculators.
Check out the detailed breakdown of what’s inside the course
- Course Introduction 02:53 02:53
All about Current Electricity
Introduction to Thinkercad Software
Series and Parallel circuits
KVL and KCL Law
Voltage Divider Technique
Current Divider Technique
I am Swarit Mahalsekar, a biomedical engineer, I am also an online instructor at more than 3 platforms.
I am also the founder of the "practical-buddy" website for analog electronics.
I had done lots of projects regarding electronics so I have good knowledge of using different software like Thinkercad, Proteus, Eagle, etc.
So whatever course I would be launching I will make sure that I will not only teach you the concepts theoretically but also enhancing your technical skills with the help of all these software listed above.
In every one of my Udemy courses, you'll see that I am always available and always offer you support through each course. I will join your success and help you through any obstacles.
User your certification to make a career change or to advance in your current career. Salaries are among the highest in the world.
Our students work
with the Best
Related Video CoursesView More
Become a valued member of Tutorials Point and enjoy unlimited access to our vast library of top-rated Video CoursesSubscribe now
Master prominent technologies at full length and become a valued certified professional.Explore Now