Found 571 Questions for Network

What are the hardware components of the Computer System?

Ginni
Updated on 30-Jul-2021 13:30:02
The hardware components of a computer are classified into five groups are Input unit, Central processing unit, Output Unit, Control Unit, Arithmetic & logical unit.Input unitInput units are used by the computer to read the information. The most frequently used input devices are keyboards, mouse, joysticks, trackballs, microphones, and so on. Whenever a key is clicked, the matching letter or digit is necessarily interpreted into its equivalent binary code and communicate over a cable to either the memory or the processor.Output unitThe output unit is the reverse of the input unit. When the processor sends the output to the output ... Read More

Block Diagram of BCD Adder in Computer Architecture?

Ginni
Updated on 30-Jul-2021 13:26:29
BCD adder refers to a 4-bit binary adder that can add two 4-bit words of BCD format. The output of the addition is a BCD-format 4-bit output word. It can descript the decimal sum of the addend and augend and a carry that is created in case this sum exceeds a decimal value of 9. Therefore, BCD adders can perform decimal addition.A BCD adder is a circuit that adds two BCD digits in parallel and makes a sum digit also in BCD. A BCD adder should contain the correction logic in its internal construction. To add 0110 to the binary ... Read More

Decimal arithmetic operations in Computer Architecture?

Ginni
Updated on 30-Jul-2021 13:23:01
Decimal arithmetic operations refer to a digital function that does decimal micro-operations. This function adds or subtracts decimal numbers by forming 9’s or 10’s complement of the subtrahend. This decimal arithmetic unit first accepts coded decimal numbers and then generates output in the binary form.Algorithms that are used for arithmetic operations with decimal data and binary data are alike. If the micro-operations symbol is interpreted correctly the same flowchart can be used for both multiplication and division.The decimal numbers in BCD are stored in groups of four bits in the computer registers. When performing decimal micro-operations, every 4-bit group represents ... Read More

What is BCD Subtraction in Computer Architecture?

Ginni
Updated on 30-Jul-2021 13:20:42
A subtractor circuit is required to perform a subtraction operation on two decimal numbers. BCD subtraction is slightly different from BCD addition. Performing subtraction operation by taking the 9’s or 10’s complement of the subtrahend and adding it to the minuend is economical.It is not possible to obtain the 9’s complement by complementing every bit in the code because the BCD is not a self- complementing code. The 9’s complement has to be formed by a circuit that subtracts Notes every BCD number from 9.The 9’s complement of a decimal digit that is represented in BCD can be obtained by ... Read More

What is BCD Adder in Computer Architecture?

Ginni
Updated on 30-Jul-2021 13:19:35
BCD adder refers to a 4-bit binary adder that can add two 4-bit words of BCD format. The output of the addition is a BCD-format 4-bit output word, which defines the decimal sum of the addend and augend and a carry that is created in case this sum exceeds a decimal value of 9. Therefore, BCD adders can implement decimal addition.Construction of BCD AdderSum of Binary DigitsSum of BCD DigitsKZ8Z4Z2Z1CS8S4S2S1Decimal00000000000000010000110001000010200011000113001000010040010100101500110001106001110011170100001000801001010019010101001010010111001111011001000012011011000113011101011014011111011115100001010016100011010117100101101018100111101119In this table, K is the carry. The subscripts below the letter Z define the weights. The weights, according to the table, are 8, 4, 2, and 1. These weights can ... Read More

What is the division of binary numbers in Computer Architecture?

Ginni
Updated on 29-Jul-2021 09:10:07
The binary division is similar to division in decimals. The process involves successive comparison, shifting, and subtraction. The division of binary numbers is easy compared to the division of decimal numbers because the quotient is either 0 or 1. It is also not necessary to check the number of times the dividend (partial remainder) fits into the divisor.Divide OverflowIn a computer system, the division operation can lead to a quotient with an overflow because the registers cannot hold a number that exceeds the standard length. To understand this better, consider a system with a standard 5-bit register.One register is used ... Read More

What is Vector Processing in Computer Architecture?

Ginni
Updated on 29-Jul-2021 08:35:11
Vector processing is a central processing unit that can perform the complete vector input in individual instruction. It is a complete unit of hardware resources that implements a sequential set of similar data elements in the memory using individual instruction.The scientific and research computations involve many computations which require extensive and high-power computers. These computations when run in a conventional computer may take days or weeks to complete. The science and engineering problems can be specified in methods of vectors and matrices using vector processing.Features of Vector ProcessingThere are various features of Vector Processing which are as follows −A vector ... Read More

What is RISC Pipeline in Computer Architecture?

Ginni
Updated on 29-Jul-2021 08:33:44
RISC stands for Reduced Instruction Set Computers. It was introduced to execute as fast as one instruction per clock cycle. This RISC pipeline helps to simplify the computer architecture’s design.It relates to what is known as the Semantic Gap, that is, the difference between the operations provided in the high-level languages (HLLs) and those provided in computer architectures.To avoid these consequences, the conventional response of the computer architects is to add layers of complexity to newer architectures. This also increases the number and complexity of instructions together with an increase in the number of addressing modes. The architecture which resulted ... Read More

What is Instruction Pipeline in Computer Architecture?

Ginni
Updated on 29-Jul-2021 09:31:47
An instruction pipeline reads consecutive instructions from memory while in the other segments the previous instructions are being implemented. Pipeline processing appears both in the data flow and in the instruction stream. This leads to the overlapping of the fetch and executes the instruction and hence simultaneous operations are performed.There is one possible more event associated with such a design is that instruction can generate a branch out of a sequence. In this method, the pipeline is clear and all the instructions that have previously been read from memory after the branch instruction should be rejected.A computer can be constructed ... Read More

What is Arithmetic Pipeline in Computer Architecture?

Ginni
Updated on 29-Jul-2021 09:36:54
Pipeline arithmetic units are generally discovered in very large-speed computers. It can execute floating-point operations, multiplication of fixed-point numbers, and the same computations encountered in mathematical problems.The inputs to the floating-point adder pipeline are two normalized floating-point binary numbers represented as −X = A x 2aY = B x 2bWhere A and B are two fractions that define the mantissa and a and b are the exponents. The floating-point addition and subtraction can be implemented in four segments, as a displayed figure. The registers labeled R is located between the segments to save intermediate outcomes. The suboperations that are implemented ... Read More
Advertisements