When an electric bulb gets heated to a very large high temperature, in which color it turns to?
When an electric bulb heated to a very high temperature, the filament is turned to white color. In a bulb, inert gasses are used to decrease the evaporation of the filament because of high temperature.
Related Articles
- The ultrasound waves can penetrate into matter to a large extent because they have:(a) very high speed (b) very high frequency(c) very high wavelength(d) very high amplitude
- Why is an Electric Bulb hot to touch when it has been switched on for a while ?
- Fuel must be heated to its ……….. temperature before it starts burning.
- The temperature at which liquids change into vapours is very high, for example, water vaporises at 100°C then how is it possible for water to evaporate at room temperature or at other temperature?
- Why is an electric bulb evacuated?
- Why is it difficult for a fireman to hose, which ejects large amount of water at a high velocity?
- Which of the following represent the suitable conditions for the liquefaction of gases?(a) low temperature, low pressure (b) high temperature, low pressure(c) low temperature, high pressure (d) high temperature, high pressure
- How to handle very large numbers in Python?
- When Ag is exposed to air it gets a black coating of
- Mercury is largely used in thermometers to measure the temperature. It is a very dangerous metal as its density is very high. If it gets into the food chain, it leads to mercury poisoning. (i) What two precautions you must take while handling equipment containing mercury? (ii) Why mercury is used in thermometers? (iii) Can you suggest other alternatives to mercury thermometers?
- A good fuel is one which possesses:(a) high calorific value and low ignition temperature. (b) high calorific value and high ignition temperature. (c) high calorific value and moderate ignition temperature. (d) low calorific value and moderate ignition temperature.
- Why should the resistance of:a) an ammeter be very small?b) a voltmeter be very large?
- Fill in the blanks:1. Our body is a ………………….. of electricity. 2. An electric cell produces electricity from the ………………….. in it. 3. In an electric circuit a fuse is a ………………….. to prevent possible fire. 4. A combination of two or more cells is called a ………………….. . 5. The coil of wire in an electric heater is called an ………………….. . 6. A ………………….. is a safety device which prevents damages to electrical circuits and possible fires. 7. The wire gets ………………….. when an electric current passes through it. 8. We must look for ………………….. mark on electrical appliances. 9. When electric current passes through a wire, it behaves like a magnet. It is the ………………….. effect of current. 10. Crane has a strong ………………….. attached to it.
- When strong/high-speed wind blows, an umbrella held upright at times gets upturned. Explain the reason.
- A good fuel should possess(a) high ignition temperature(b) moderate ignition temperature(c) high calorific value(d) both high calorific value and moderate ignition temperature
Kickstart Your Career
Get certified by completing the course
Get Started