The correct procedure of heating iron-sulphur mixture to prepare iron sulphide is :(1) heat the powder mixture at the base of the test tube using a blue flame throughout.(2) heat the iron filings and sulphur mixture in the middle of the test tube using yellow flame throughout.(3) heat the powder mixture at the top of the test tube using an orange flame throughout.(4) heat the iron fillings-sulphur mixture at 3/4 quarters of the test tube using a red flame throughout.
Correct Answer: (1) heat the powder mixture at the base of the test tube using a blue flame throughout.
Explanation: Fe and S mixture is prepared by heating them in the test tube under blue flames, they are heated until the grey-black coloured iron sulphide is obtained.
Related Articles
- How will you separate a mixture of iron fillings and sulphur powder without using carbon disulphide?
- Describe a method for separating a mixture of iron filings and sulphur powder other than that by using a magnet.
- Discuss the method of separating a mixture containing chalk powder, iron filings and naphthalene.
- When a mixture of iron powder and sulphur powder is heated strongly to form iron sulphide, then heat energy is :(a) released(b) first absorbed and then released(c) absorbed(d) neither absorbed nor released
- A student heats calculated amounts of iron filings and sulphur powder together in a boiling tube. He will obtain :(1) a homogeneous mixture of Fe and S(2) a heterogeneous compound of Fe and S(3) a homogeneous compound of FeS(4) a heterogeneous mixture of FeS, Fe and S
- How will you separate a mixture of iron filings, chalk powder and common salt?
- What is the use of a test tube holder?
- Describe the various steps involved in the separation of iodine, iron filings and salt from a mixture.
- When dilute sulphuric acid is added to granulated zinc placed in a test-tube, the observation made is :(1) the surface of the metal turns shiny(2) the reaction mixture turns milky(3) odour of sulphur dioxide is observed(4) a colourless and odourless gas evolves with bubbles
- In thermite welding a mixture of __________ and __________ is ignited with a burning magnesium ribbon which produces molten iron metal as large amount of heat is evolved(a) iron (III) oxide and aluminium powder (b) iron (II) oxide and aluminium powder (c) iron (III) chloride and aluminium powder (d) iron (III) sulphate and aluminium powder
- 2 mL each of concentrated HCl, HNO3 and a mixture of concentrated HCl and concentrated HNO3 in the ratio of 3: 1 were taken in test tubes labelled as A, B and C. A small piece of metal was put in each test tube. No change occurred in test tubes A and B but the metal got dissolved in test tube C respectively. The metal could beAlAuCuPt
- Why the flame of burning LPG gas is blue in colour, and the flame of a burning candle is orange and yellow?
- 2 mL each of conc. HCl, cone. HNO3 and a mixture of conc. HCl and conc. HNO3 in the ratio of 3: 1 were taken in test tubes labelled as A, B, and C. A small piece of metal was put in each test tube. No change occurred in test tubes A But the metal got dissolved in test tube C. The metal could be.AlAu CuPt.
- How will you separate a mixture of common salt, sulphur powder and sand?
Kickstart Your Career
Get certified by completing the course
Get Started