In a hot water heating system, there is a cylindrical pipe of length $ 28 \mathrm{~m} $ and diameter $ 5 \mathrm{~cm} $. Find the total radiating surface in the system.
Given:
In a hot water heating system, there is a cylindrical pipe of length $28\ m$ and diameter $5\ cm$.
To do:
We have to find the total radiating surface in the system.
Solution:
Diameter of the pipe $= 5\ cm$
This implies,
Radius of the pipe $(r)=\frac{5}{2} \mathrm{~cm}$
Length of the pipe $(h)=28 \mathrm{~m}$
$=2800 \mathrm{~cm}$
Therefore,
The surface area of the pipe $=2 \pi r h$
$=2 \times \frac{22}{7} \times \frac{5}{2} \times 2800$
$=44000 \mathrm{~cm}^{2}$.
The total radiating surface in the system is $44000\ cm^2$.
Related Articles
- In a hot water heating system, there is a cylindrical pipe of length $28\ m$ and diameter $5\ cm$. Find the total radiating surface in the system.
- The inner diameter of a cylindrical wooden pipe is \( 24 \mathrm{~cm} \) and its outer diameter is \( 28 \mathrm{~cm} \). The length of the pipe is \( 35 \mathrm{~cm} \). Find the mass of the pipe, if \( 1 \mathrm{~cm}^{3} \) of wood has a mass of \( 0.6 \mathrm{~g} \) .
- Water is flowing at the rate of \( 2.52 \mathrm{~km} / \mathrm{h} \) through a cylindrical pipe into a cylindrical tank, the radius of the base is \( 40 \mathrm{~cm} \). If the increase in the level of water in the tank, in half an hour is \( 3.15 \mathrm{~m} \), find the internal diameter of the pipe.
- A farmer runs a pipe of internal diameter \( 20 \mathrm{~cm} \) from the canal into a cylindrical tank in his field which is \( 10 \mathrm{~m} \) in diameter and \( 2 \mathrm{~m} \) deep. If water flows through the pipe at the rate of \( 3 \mathrm{~km} / \mathrm{h} \), in how much time will the tank be filled?
- Find the amount of water displaced by a solid spherical ball of diameter(i) \( 28 \mathrm{~cm} \)(ii) \( 0.21 \mathrm{~m} \).
- The difference between outside and inside surface areas of cylindrical metallic pipe \( 14 \mathrm{~cm} \) long is \( 44 \mathrm{~m}^{2} \). If the pipe is made of \( 99 \mathrm{~cm}^{3} \) of metal, find the outer and inner radii of the pipe.
- A cylindrical pillar is \( 50 \mathrm{~cm} \) in diameter and \( 3.5 \mathrm{~m} \) in height. Find the cost of painting the curved surface of the pillar at the rate of RS.\( 12.50 \) per \( \mathrm{m}^{2} \).
- Rain water, which falls on a flat rectangular surface of length \( 6 \mathrm{~m} \) and breadth \( 4 \mathrm{~m} \) is transferred into a cylindrical vessel of internal radius \( 20 \mathrm{~cm} \). What will be the height of water in the cylindrical vessel if a rainfall of \( 1 \mathrm{~cm} \) has fallen?
- Find the surface area of a sphere of diameter(i) \( 14 \mathrm{~cm} \)(ii) \( 21 \mathrm{~cm} \)(iii) \( 3.5 \mathrm{~m} \).
- The rain water from a roof of dimensions \( 22 \mathrm{~m} \times 20 \mathrm{~m} \) drains into a cylindrical vessel having diameter of base \( 2 \mathrm{~m} \) and height \( 3.5 \mathrm{~m} \). If the rain water collected from the roof just fills the cylindrical vessel, then find the rain fall in \( \mathrm{cm} \).
- Find the total surface area of a cone, if its slant height is \( 21 \mathrm{~m} \) and diameter of its base is \( 24 \mathrm{~m} \).
- The inner diameter of a cylindrical wooden pipe is $24\ cm$ and its outer diameter is $28\ cm$. The length of the pipe is $35\ cm$. Find the mass of the pipe, if $1\ cm^3$ of wood has a mass of $0.6\ gm$.
- A Metallic pipe is 0.7 cm thick. Inner radius of the pipe is 3.5 cm and length is 5 dm. Find the total surface area.
- Water flows at the rate of \( 15 \mathrm{~km} / \mathrm{hr} \) through a pipe of diameter \( 14 \mathrm{~cm} \) into a cuboidal pond which is \( 50 \mathrm{~m} \) long and \( 44 \mathrm{~m} \) wide. In what time will the level of water in the pond rise by \( 21 \mathrm{~cm} \)?
Kickstart Your Career
Get certified by completing the course
Get Started