Learn SolidWorks with a fully practical approach

What we can do with SolidWorks
1. We can make up new parts, assemble them and then create drawings for the parts or the assemblies.
2. Further we can assign material to a part and get its mass volume properties.
3. We can test a part or an assembly of moderate complexity under various loading conditions. We can analyze how much the part will bend under what force, how much force it will bear and hence optimize our design for least material required for any specific loading requirement.
4. We can see how the fluid flows through a part or an assembly of part using SolidWorks FloXpress.
5. Other than this, we can analyze the stress behavior of a critical part in motion, calculate various dynamic functions of a part in motion.
6. You can create models of Printed Circuit Boards (PCB) using CircuitWorks which function like a real circuit.
7. You can use SolidWorks Costing to work out the cost of production by specifying the costs of materials used and processes applied.
8. Using SolidWorks Design Checker, you can check dimensioning standards, fonts, materials, sketches and other design elements as against the specified design criteria.
9. You can verify whether can part can be manufactured or not using DFMXpress.10. A path of pipes, tubes or electrical cables can be built between components using SolidWorks Routing.

There are many more to explore in SolidWorks.

Why choose for our Video Series?

We cover every possible design element of SolidWorks that is going to be of your use.

In each of our video, we do not put up only the selected parts of the tutorial video. We show you from start to finish giving you the intricate details and showing you how it goes in real life. Any function failure is seen in many of the videos which give you a good idea of what to do and what not to do.

In every video, we start from zero so that you are not hung at any stage of designing without having a clue of getting out of it. Following our video tutorials, you can very easily learn the parts.

We show you the designing of products that are actually accomplished in the design industry. Things are practical, not theoretical. You know what the difference between theoretical and practical one is.

SKILLS YOU WILL GAIN

• We can test a part or an assembly of moderate complexity under various loading conditions.
• We can analyze how much the part will bend under what force, how much force it will bear and hence optimize our design for least material required for any specific loading requirement.
• We can see how the fluid flows through a part or an assembly of part using SolidWorks FloXpress