Q 1 - Which button should you use to link a test from the Test Plan Tree to a requirement?

A - Add to Requirements.

B - Add to Coverage.

C - Add to Link Tests.

D - Add to Req Coverage.

Q 2 - In the automatic conversion of requirements to tests, a requirement can be converted into what?

A - Folders, scripts, or design steps.

B - Files, folders, or tests.

C - Folders, tests, or design steps.

D - Folders, subfolders, or tests.

Q 3 - Which function enables you to associate a requirement with other requirements?

A - Impact Analysis

B - Requirements Traceability

C - Requirements Analysis

D - Functional Complexity

Q 4 - Which entities can be associated with a requirement?

A - Tests, defects, and non-hierarchical requirements

B - Tests, defects, and linked requirements

C - Cycles, releases, tests, defects, and requirements

D - Releases, business components, tests, defects, and requirements

Q 5 - What is the purpose of risk-based testing?

A - To calculate the level at which each requirement must be tested.

B - To analyze the level at which each requirement must be tested.

C - To define the level at which each requirement must be tested.

D - To calculate the level at which each instance must be tested.

Q 6 - In which tab can you define traceability links ?

A - Impact Analysis

B - Test Coverage

C - Relationships

D - Risk

Q 7 - What does failure probability determine?

A - The predictability of failure of a test associated with a requirement

B - The complexity of failure of a test associated with a requirement

C - The likelihood of failure of a test associated with a requirement

D - The locality of failure of a test associated with a requirement

Q 8 - Which ALM feature enables you to calculate risks?

A - Risk-based management

B - Analysis requirement management

C - Risk computation management

D - Functional complexity management

Q 9 - Which risk-based factor enables you to determine whether a requirement should be fully or partially tested?

A - Testing cost

B - Defect probability

C - Functional relevance

D - Testing time

Q 10 - Which parameter can be used to send an email message in plain text ?

A - MAIL SERMES

B - MAIL FORMAT

C - MAIL-MESSAGE-FORMAT

D - MAIL APPLETS

Q 11 - Which command enables you to reuse and modularize test steps across multiple tests?

A - Adjust tests

B - Call to test

C - Call to steps

D - Call to instance

Q 12 - The Test Set Tree can contain as many top-level Test Set folders as you need, and each sublevel can have its own sublevels, What is the maximum number of Test Set subfolders allowed?

A - 254

B - 675

C - 676

D - 999

Q 13 - What enables you to move library folders and libraries.

A - Copy and Paste

B - Cut and Paste

C - Library Wizard

D - Select and Paste

Q 14 - What enables you to associate the test set with the tests stored in a baseline?

A - baselining

B - pinning

C - versioning

D - tagging

Q 15 - What is the function of a library ?

A - to create and manage a set of entities in a project and the relationship between them

B - to create and manage a set of instances in a project and the relationship between them

C - to define a Hierarchical Instance Tree to create and manage your resources

D - to define and manage a set of baseline projects and the relationship between them

Q 16 - Which ALM feature allows you to view the complete chronology of an entity, including previous versions, authors of the versions, and its date of creation?

A - version history.

B - entity history.

C - chronology history.

D - complete history.

Q 17 - Where do you view prior versions of an entity?

A - History

B - Versions

C - Dependencies

D - Management

Q 18 - The project manager requests that the test engineer make changes in a test case. Which version control feature should the test engineer use to modify the test case ?

A - UNDO

B - CHECK IN

C - CHECK OUT

D - COMPARE

Q 19 - How do you associate defects with tests? (Select three.)

1. Associate tests from the Test Plan module with defects.

2. Associate test sets from the Test Lab module with defects

3. Associate defects with tests run during a manual test run.

4. Associate test instances with defects during a manual test run

5. Associate tests with multiple defects.

6. Associate requirements with multiple defects.

A - (1) (3) and (5) only.

B - (2) (4) and (6) only.

C - (1) (2) and (4) only.

D - (3) (4) and (6) only.

Q 20 - You find a defect in an application and send it to the developer to fix. The developer cannot interpret the problem and requests a snapshot of the application with the defect. What enables you to take a snapshot?

A - History tab

B - Attachments tab

C - Description tab

D - Details tab

Q 21 - How does ALM define the type of tests in a test set ?

A - White box and black box

B - Manual and integrated

C - Manual and automated

D - Automated and unit

Q 22 - What does the Execution Grid enable a user to do? (Select two,)

1. Declare the tests that make up each test set

2. View the tests in a diagram for adding or deleting tests

3. Display test data in a grid

4. Display test data in a diagram

5. Display email notification rules

A -(1) and (3) only.

B - (2) and (4) only.

C - (4) and (5) only.

D - (3) and (4) only.

Q 23 - Your test set includes two automated tests: Open Order and Update Order. How can you configure the Execution Flow to ensure the Update Order test will only run after the Open Order test completes successfully?

A - Define an Execution Condition where Open Order must Finish before Update Order starts.

B - Define Update Order as a dependent test to Open Order.

C - Define an Execution Condition where Open Order must Pass before Update Order starts.

D - Define an Execution Condition where Update Order must Pass before Open Order starts.

Q 24 - What is the best practice for running an automated test concurrently on multiple remote hosts?

A - Adding multiple instances of the test, selecting a host for each instance

B - Running a test separately on each of the multiple remote hosts

C - Running a test set sequentially on each of the multiple remote hosts

D - Using the Host Manager Wizard to configure hosts and run tests and test sets

Q 25 - Which factors affect time dependency when running the tests?

A - Schedule and time

B - Date and flow

C - Time and date

D - Schedule and flow

Q 26 - Your project manager requests that you send the execution status of a test set of 10 tests by tomorrow morning. There is a chance that the fifth test might fail. What should you do to ensure that the subsequent tests run?

A - Schedule the test run based on the Execution Condition.

B - Schedule the test run independently.

C - Schedule the test run by selecting the execution status Never Stop.

D - Schedule the test run based on the parameter,

Q 27 - Your project manager wants you to run an automated test on a remote host, You are not able to view this host , What should you do to solve this problem?

A - Set up the host In Host Manager.

B - Add the host using the Add Hosts Wizard.

C - Use the Host Wizard to find the host.

D - Set up the host in the Host Manager Wizard,

Q 28 - Which feature provides an audit trail of changes made to each defect ?

A - Defects grid

B - Grid filter

C - Audit trail

D - History tab

Q 29 - You can view a list of alerts for a _____________ entity.

A - A test in the test plan tree or Test Grid

B - A test instance in the Execution Grid

C - None of above

D - Both A & B

Q 30 - The requirements specification workflow consists of the following ?

A - Define Testing Scope, Create Requirements, Detail Requirements, Assign to Releases, Analyze Requirements

B - Define Testing Scope, Detail Requirements, Create Requirements, Assign to Releases, Analyze Requirements

C - Define Testing Scope, Create Requirements, Detail Requirements, Analyze Requirements, Assign to Releases

D - Define Testing Scope, Create Requirements, Analyze Requirements, Detail Requirements, Assign to Releases

Q 31 - You cannot copy a requirements within the same project or between projects.

A - True

B - False

Q 32 - Using the Requirements Traceability tab in the Requirement Details view, you can add traceability links to and from a selected requirement. _______ Links indicate requirements that affect a selected requirement. _________ Links indicate requirements that are affected by a selected requirement.

A - Trace from, Trace to

B - Trace to, Trace from

C - Trace from select, Trace to select

D - Trace to select, Trace from select

Q 33 - The __________ feature enables you to calculate at which level to test each requirement, based on the nature of the requirement and the resources you have available.

A - Level-based quality management

B - Calculate-based quality management

C - Risk-based quality management

D - Traceability Requirements

Q 34 - You can assign or calculate the Risk Category of an assessment requirement. The Risk Category is composed of its __________

A - Business Criticality & Failure Probability

B - Business Probability & Failure Criticality

C - Priority & Severity

D - None of above

Q 35 - The __________ link displays the requirements for which you did not determine a Risk Category or exclude explicitly from the analysis.

A - Missing risk assessment

B - Miss assessment

C - Missing assessment

D - Exclude assessment

Q 36 - Your project manager requests that you send the execution status of a test set of 10 tests by tomorrow morning. There is a chance that the fifth test might fail. What should you do to ensure that the subsequent tests run?

A - Schedule the test run based on the Execution Condition.

B - Schedule the test run independently.

C - Schedule the test run by selecting the execution status Never Stop.

D - Schedule the test run based on the parameter.

Q 37 - During Requirement Risks calculation, the ________ displays the requirements for which you did not determine a Risk Category or exclude explicitly from the analysis ?

A - Missing assessment link

B - Missing assessment field

C - Missing assessment value

D - Missing assessment relation

Q 38 - Which of the item is not a part of "Developing a test plan" in ALM.

A - Design Test Steps

B - Design Tests

C - Automate Tests

D - Define Testing Policy Settings

Q 39 - You can access the Test Plan menu bar from the Test Plan module by pressing the shortcut key ________

A - F7

B - F9

C - F12

D - F11

Q 40 - To find a specific test by Test ID in the Test Grid, choose ________ and enter the test ID

A - Test > Go to Test

B - Test > find Test

C - Test > search Test

D - Test > link Test