Copyright © tutorialspoint.com
yum is an interactive, rpm based, package manager. It can automatically perform system updates, including dependency analysis and obsolete processing based on "repository" metadata. It can also perform installation of new packages, removal of old packages and perform queries on the installed and/or available packages among many other commands/services (see below). yum is similar to other high level package managers like apt-get and smart.
While there are some graphical interfaces directly to the yum code, more recent graphical interface development is happening with PackageKit and the gnome-packagekit application.
command is one of:
* install package1 [package2] [...]
* update [package1] [package2] [...]
* upgrade [package1] [package2] [...]
* remove | erase package1 [package2] [...]
* list [...]
* info [...]
* provides | whatprovides feature1 [feature2] [...]
* clean [ packages | headers | metadata | dbcache | all ]
* groupinstall group1 [group2] [...]
* groupupdate group1 [group2] [...]
* grouplist [hidden] [groupwildcard] [...]
* groupremove group1 [group2] [...]
* groupinfo group1 [...]
* search string1 [string2] [...]
* shell [filename]
* resolvedep dep1 [dep2] [...]
* localinstall rpmfile1 [rpmfile2] [...]
* localupdate rpmfile1 [rpmfile2] [...]
* reinstall package1 [package2] [...]
* downgrade package1 [package2] [...]
* deplist package1 [package2] [...]
* repolist [all|enabled|disabled]
* help [command]
Unless the --help or -h option is given, one of the above commands must be present.
Repository configuration is honored in all operations.
|install||Is used to install the latest version of a package or group of packages while ensuring that all dependencies are satisfied. If no package matches the given package name(s), they are assumed to be a shell glob and any matches are then installed. If the name starts with an @ character the rest of the name is used as though passed to the groupinstall command. If the name is a file, then install works like localinstall. If the name doesnt match a package, then package "provides" are searched (Eg. "_sqlitecache.so()(64bit)") as are filelists (Eg. "/usr/bin/yum"). Also note that for filelists, wildcards will match multiple packages.|
If run without any packages, update will update every currently
installed package. If one or more packages or package globs are specified, Yum will
only update the listed packages. While updating packages, yum
will ensure that all dependencies are satisfied. If the packages or globs
specified match to packages which are not currently installed then update will
not install them. update operates on groups, files, provides and filelists
just like the "install" command.
If the main obsoletes configure option is true (default) or the --obsoletes flag is present yum will include package obsoletes in its calculations - this makes it better for distro-version changes, for example: upgrading from somelinux 8.0 to somelinux 9.
|check-update||Implemented so you could know if your machine had any updates that needed to be applied without running it interactively. Returns exit value of 100 if there are packages available for an update. Also returns a list of the pkgs to be updated in list format. Returns 0 if no packages are available for update. Returns 1 if an error occurred. Running in verbose mode also shows obsoletes.|
|upgrade||Is the same as the update command with the --obsoletes flag set. See update for more details.|
|remove or erase||Are used to remove the specified packages from the system as well as removing any packages which depend on the package being removed. remove operates on groups, files, provides and filelists just like the "install" command.|
|list||Is used to list various information about available packages; more complete details are available in the List Options section below.|
|provides or whatprovides||Is used to find out which package provides some feature or file. Just use a specific name or a file-glob-syntax wildcards to list the packages available or installed that provide that feature or file.|
|search||Is used to find any packages matching a string in the description, summary and package name fields of an rpm. Useful for finding a package you do not know by name but know by some word related to it.|
|info||Is used to list a description and summary information about available packages; takes the same arguments as in the List Options section below.|
|clean||Is used to clean up various things which accumulate in the yum cache directory over time. More complete details can be found in the Clean Options section below.|
|makecache||Is used to download and make usable all the metadata for the currently enabled yum repos.|
Is used to install all of the individual packages in a group, of the specified
types (this works as if youd taken each of those package names and put them on
the command line for a "yum install" command).
The group_package_types configuration option specifies which types will be installed.
|groupupdate||Is just an alias for groupinstall, which will do the right thing because "yum install X" and "yum update X" do the same thing, when X is already installed.|
|grouplist||Is used to list the available groups from all yum repos. Groups are marked as "installed" if all mandatory packages are installed, or if a group doesnt have any mandatory packages then it is installed if any of the optional or default package are installed. The optional "hidden" argument will also list groups marked as not being "user visible". If you pass the -v option, to enable verbose mode, then the groupids are displayed.|
|groupremove||Is used to remove all of the packages in a group, unlike "groupinstall" this will remove everything regardless of group_package_types. It is worth pointing out that packages can be in more than one group, so "groupinstall X Y" followed by "groupremove Y" does not do give you the same result as "groupinstall X".|
|groupinfo||Is used to give the description and package list of a group (and which type those packages are marked as). Note that you can use the yum-filter-data and yum-list-data plugins to get/use the data the other way around (Ie. what groups own packages need updating). If you pass the -v option, to enable verbose mode, then the package names are matched against installed/available packages similar to the list command.|
|shell||Is used to enter the yum shell, when a filename is specified the contents of that file is executed in yum shell mode. See yum-shell(8) for more info|
|resolvedep||Is used to list packages providing the specified dependencies, at most one package is listed per dependency.|
|localinstall||Is used to install a set of local rpm files. If required the enabled repositories will be used to resolve dependencies. Note that the install command will do a local install, if given a filename.|
|localupdate||Is used to update the system by specifying local rpm files. Only the specified rpm files of which an older version is already installed will be installed, the remaining specified packages will be ignored. If required the enabled repositories will be used to resolve dependencies. Note that the update command will do a local install, if given a filename.|
|reinstall||Will reinstall the identically versioned package as is currently installed. This does not work for "installonly" packages, like Kernels. reinstall operates on groups, files, provides and filelists just like the "install" command.|
|downgrade||Will try and downgrade a package from the version currently installed to the previously highest version (or the specified version). The depsolver will not necessarily work, but if you specify all the packages it should work (and thus. all the simple cases will work). Also this does not work for "installonly" packages, like Kernels. downgrade operates on groups, files, provides and filelists just like the "install" command.|
|deplist||Produces a list of all dependencies and what packages provide those dependencies for the given packages.|
|repolist||Produces a list of configured repositories. The default is to list all enabled repositories. If you pass -v, for verbose mode, more information is listed.|
|help||Produces help, either for all commands or if given a command name then the help for that particular command.|
|-h, --help||Help; display a help message and then quit.|
Assume yes; assume that the answer to any question which would be asked
Configuration Option: assumeyes
|-c [config file]||Specifies the config file location - can take http, ftp urls and local file paths.|
|-q, --quiet||Run without output. Note that you likely also want to use -y.|
|-v, --verbose||Run with a lot of debugging output.|
Sets the debugging level to [number] - turns up or down the amount of things that are printed. Practical range: 0 - 10
Configuration Option: debuglevel
Sets the error level to [number] Practical range 0 - 10. 0 means print only critical errors about which you must be told. 1 means print all errors, even ones that are not overly important. 1+ means print more errors (if any) -e 0 is good for cron jobs.
Configuration Option: errorlevel
|-R [time in minutes]||Sets the maximum amount of time yum will wait before performing a command - it randomizes over the time.|
|-C||Tells yum to run entirely from cache - does not download or update any headers unless it has to to perform the requested action.|
|--version||Reports the yum version number and exits.|
|--showduplicates||Doesnt limit packages to their latest versions in the info, list and search commands (will also affect plugins which use the doPackageLists() API).|
Specifies an alternative installroot, relative to which all packages will be
Configuration Option: installroot
Enables specific repositories by id or glob that have been disabled in the
configuration file using the enabled=0 option.
Configuration Option: enabled
Disables specific repositories by id or glob.
Configuration Option: enabled
This option only has affect for an update, it enables yum's obsoletes
processing logic. For more information see the update command above.
Configuration Option: obsoletes
|-x, --exclude=package||Exclude a specific package by name or glob from updates on all repositories. Configuration Option: exclude|
|--color=[always|auto|never]||Display colorized output automatically, depending on the output terminal, always (using ANSI codes) or never. Note that some commands (Eg. list and info) will do a little extra work when color is enabled. Configuration Option: color|
Disable the excludes defined in your config files. Takes one of three options:
all == disable all excludes
main == disable excludes defined in [main] in yum.conf
repoid == disable excludes defined for that repo
|--disableplugin=plugin||Run with one or more plugins disabled, the argument is a comma separated list of wildcards to match against plugin names.|
Run with all plugins disabled.
Configuration Option: plugins
Run with gpg signature checking disabled.
Configuration Option: gpgcheck
Resolve depsolve problems by removing packages that are causing problems
from the transaction.
Configuration Option: skip_broken
|-t, --tolerant||This option currently does nothing.|
|yum list [all | glob_exp1] [glob_exp2] [...]||List all available and installed packages.|
|yum list available [glob_exp1] [...]||List all packages in the yum repositories available to be installed.|
|yum list updates [glob_exp1] [...]||List all packages with updates available in the yum repositories.|
|yum list installed [glob_exp1] [...]||List the packages specified by args. If an argument does not match the name of an available package, it is assumed to be a shell-style glob and any matches are printed.|
|yum list extras [glob_exp1] [...]||List the packages installed on the system that are not available in any yum repository listed in the config file.|
|yum list obsoletes [glob_exp1] [...]||List the packages installed on the system that are obsoleted by packages in any yum repository listed in the config file.|
|yum list recent||List packages recently added into the repositories.|
|Specifying package names||All the list options mentioned above take file-glob-syntax wildcards or package names as arguments, for example yum list available foo* will list all available packages that match foo*. (The single quotes will keep your shell from expanding the globs.)|
|yum clean expire-cache||
Eliminate the local data saying when the metadata and mirrorlists were downloaded for each repo. This means yum will revalidate the cache for each repo. next time it is used. However if the cache is still valid, nothing significant was deleted.
|yum clean packages||
Eliminate any cached packages from the system. Note that packages are not automatically deleted after they are downloaded.
|yum clean headers||
Eliminate all of the header files which yum uses for dependency resolution.
|yum clean metadata||
Eliminate all of the files which yum uses to determine the remote
availability of packages. Using this option will force yum to download all the
metadata the next time it is run.
|yum clean dbcache||
Eliminate the sqlite cache used for faster access to metadata.
Using this option will force yum to recreate the cache the next time
it is run.
|yum clean all||
Runs yum clean packages and yum clean headers, yum clean metadata and yum clean dbcache as above.
|Specifying package names||A package can be referred to for install,update,list,remove etc with any of the following:|
For example: yum remove kernel-2.4.1-10.i686
1. The plugin module file must be installed in the plugin path as just described.
2. The global plugins option in /etc/yum/yum.conf must be set to 1.
3. A configuration file for the plugin must exist in /etc/yum/pluginconf.d/<plugin_name>.conf and the enabled setting in this file must set to 1. The minimal content for such a configuration file is:
enabled = 1
/etc/yum.conf /etc/yum.repos.d/ /etc/yum/pluginconf.d/ /var/cache/yum/
See the Authors file included with this program.
Copyright © tutorialspoint.com