Copyright © tutorialspoint.com
Common uses include:
The options are as follows:
|-4||Forces nc to use IPv4 addresses only.|
|-6||Forces nc to use IPv6 addresses only.|
|-D||Enable debugging on the socket.|
|-d||Do not attempt to read from stdin.|
|-h||Prints out nc help.|
|Specifies a delay time interval between lines of text sent and received. Also causes a delay time between connections to multiple ports.|
|-k||Forces nc to stay listening for another connection after its current connection is completed. It is an error to use this option without the -l option.|
|-l||Used to specify that nc should listen for an incoming connection rather than initiate a connection to a remote host. It is an error to use this option in conjunction with the -p , -s , or -z options. Additionally, any timeouts specified with the -w option are ignored.|
|-n||Do not do any DNS or service lookups on any specified addresses, hostnames or ports.|
|Specifies the source port nc should use, subject to privilege restrictions and availability. It is an error to use this option in conjunction with the -l option.|
|-r||Specifies that source and/or destination ports should be chosen randomly instead of sequentially within a range or in the order that the system assigns them.|
|-S||Enables the RFC 2385 TCP MD5 signature option.|
|Specifies the IP of the interface which is used to send the packets. It is an error to use this option in conjunction with the -l option.|
|Specifies IP Type of Service (ToS) for the connection. Valid values are the tokens "lowdelay", "throughput", "reliability", or an 8-bit hexadecimal value preceded by "0x".|
|-t||Causes nc to send RFC 854 DONT and WONT responses to RFC 854 DO and WILL requests. This makes it possible to use nc to script telnet sessions.|
|-U||Specifies to use Unix Domain Sockets.|
|-u||Use UDP instead of the default option of TCP.|
|-v||Have nc give more verbose output.|
|If a connection and stdin are idle for more than timeout seconds, then the connection is silently closed. The -w flag has no effect on the -l option, i.e. nc will listen forever for a connection, with or without the -w flag. The default is no timeout.|
|Requests that nc should use the specified protocol when talking to the proxy server. Supported protocols are "4" (SOCKS v.4), "5" (SOCKS v.5) and "connect" (HTTPS proxy). If the protocol is not specified, SOCKS version 5 is used.|
|-x proxy_address[: port]|
|Requests that nc should connect to hostname using a proxy at proxy_address and port. If port is not specified, the well-known port for the proxy protocol is used (1080 for SOCKS, 3128 for HTTPS).|
|-z||Specifies that nc should just scan for listening daemons, without sending any data to them. It is an error to use this option in conjunction with the -l option.|
hostname can be a numerical IP address or a symbolic hostname (unless the -n option is given). In general, a hostname must be specified, unless the -l option is given (in which case the local host is used).
port [s] can be single integers or ranges. Ranges are in the form nn-mm. In general, a destination port must be specified, unless the -U option is given (in which case a socket must be specified).
$ nc -l 1234
nc is now listening on port 1234 for a connection. On a second console (or a second machine), connect to the machine and port being listened on:
$ nc 127.0.0.1 1234
There should now be a connection between the ports. Anything typed at the second console will be concatenated to the first, and vice-versa. After the connection has been set up, nc does not really care which side is being used as a 'server' and which side is being used as a 'client'. The connection may be terminated using an EOF ('^D').
Start by using nc to listen on a specific port, with output captured into a file:
$ nc -l 1234 > filename.out
Using a second machine, connect to the listening nc process, feeding it the file which is to be transferred:
$ nc host.example.com 1234 < filename.in
After the file has been transferred, the connection will close automatically.
$ echo -n "GET / HTTP/1.0\r\n\r\n" | nc host.example.com 80
Note that this also displays the headers sent by the web server. They can be filtered, using a tool such as sed(1), if necessary.
More complicated examples can be built up when the user knows the format of requests required by the server. As another example, an email may be submitted to an SMTP server using:
$ nc localhost 25 << EOF HELO host.example.com MAIL FROM: <firstname.lastname@example.org> RCPT TO: <email@example.com> DATA Body of email. . QUIT EOF
$ nc -z host.example.com 20-30 Connection to host.example.com 22 port [tcp/ssh] succeeded! Connection to host.example.com 25 port [tcp/smtp] succeeded!
The port range was specified to limit the search to ports 20 - 30.
Alternatively, it might be useful to know which server software is running, and which versions. This information is often contained within the greeting banners. In order to retrieve these, it is necessary to first make a connection, and then break the connection when the banner has been retrieved. This can be accomplished by specifying a small timeout with the -w flag, or perhaps by issuing a "QUIT" command to the server:
$ echo "QUIT" | nc host.example.com 20-30 SSH-1.99-OpenSSH_3.6.1p2 Protocol mismatch. 220 host.example.com IMS SMTP Receiver Version 0.84 Ready
$ nc -p 31337 -w 5 host.example.com 42
Open a UDP connection to port 53 of host.example.com:
$ nc -u host.example.com 53
Open a TCP connection to port 42 of host.example.com using 10.1.2.3 as the IP for the local end of the connection:
$ nc -s 10.1.2.3 host.example.com 42
Create and listen on a Unix Domain Socket:
$ nc -lU /var/tmp/dsocket
Connect to port 42 of host.example.com via an HTTP proxy at 10.2.3.4, port 8080. This example could also be used by ssh(1); see the ProxyCommand directive in ssh_config(5) for more information.
$ nc -x10.2.3.4:8080 -Xconnect host.example.com 42
Copyright © tutorialspoint.com