Copyright © tutorialspoint.com
[-u|--utc] --localtime --noadjfile --directisa --test [-D|--debug]
and arcane options for DEC Alpha:
[-A|--arc] [-J|--jensen] [-S|--srm] [-F|--funky-toy]
Minimum unique abbreviations of all options are acceptable.
Also, -h asks for a help message.
You can also run hwclock periodically to insert or remove time from the Hardware Clock to compensate for systematic drift (where the clock consistently gains or loses time at a certain rate if left to run).
Read the Hardware Clock and print the time on Standard Output.
The time shown is always in local time, even if you keep your Hardware Clock
in Coordinated Universal Time. See the
|--set||Set the Hardware Clock to the time given by the --date option.|
Set the System Time from the Hardware Clock.
Also set the kernels timezone value to the local timezone as indicated by the TZ environment variable and/or /usr/share/zoneinfo, as tzset(3) would interpret them. The obsolete tz_dsttime field of the kernels timezone value is set to DST_NONE. (For details on what this field used to mean, see settimeofday(2).)
This is a good option to use in one of the system startup scripts.
|Set the Hardware Clock to the current System Time.|
|Add or subtract time from the Hardware Clock to account for systematic drift since the last time the clock was set or adjusted. See discussion below.|
Print the kernels Hardware Clock epoch value to standard output.
This is the number of years into AD to which a zero year value in the
Hardware Clock refers. For example, if you are using the convention
that the year counter in your Hardware Clock contains the number of
full years since 1952, then the kernels Hardware Counter epoch value
must be 1952.
This epoch value is used whenever hwclock reads or sets the Hardware Clock.
|Set the kernels Hardware Clock epoch value to the value specified by the --epoch option. See the --getepoch option for details.|
|Print the version of hwclock on Standard Output.|
You need this option if you specify the
--set option. Otherwise, it is ignored.
This specifies the time to which to set the Hardware Clock.
The value of this option is an argument to the
hwclock --set --date= 9/22/96 16:45:05
The argument is in local time, even if you keep your Hardware Clock in Coordinated Universal time. See the --utc option.
Specifies the year which is the beginning of the Hardware Clocks
epoch. I.e. the number of years into AD to which a zero value in the
Hardware Clocks year counter refers. It is used together with
the --setepoch option to set the kernels idea of the epoch of the
Hardware Clock, or otherwise to specify the epoch for use with
direct ISA access.
For example, on a Digital Unix machine:
hwclock --setepoch --epoch=1952
|The following options apply to most functions.|
Indicates that the Hardware Clock is kept in Coordinated Universal
Time or local time, respectively. It is your choice whether to keep
your clock in UTC or local time, but nothing in the clock tells which
youve chosen. So this option is how you give that information to
If you specify the wrong one of these options (or specify neither and take a wrong default), both setting and querying of the Hardware Clock will be messed up.
If you specify neither --utc nor --localtime , the default is whichever was specified the last time hwclock was used to set the clock (i.e. hwclock was successfully run with the --set , --systohc , or --adjust options), as recorded in the adjtime file. If the adjtime file doesnt exist, the default is local time.
disables the facilities provided by
/etc/adjtime. hwclock will not read nor write to that file with this option. Either
--localtime must be specified when using this option.
is meaningful only on an ISA machine or an Alpha (which implements enough
of ISA to be, roughly speaking, an ISA machine for
hwclocks purposes). For other machines, it has no effect. This option tells
hwclock to use explicit I/O instructions to access the Hardware Clock.
Without this option,
hwclock will try to use the /dev/rtc device (which it assumes to be driven by the
rtc device driver). If it is unable to open the device (for read), it will
use the explicit I/O instructions anyway.
The rtc device driver was new in Linux Release 2.
Indicates that the Hardware Clock is incapable of storing years outside
the range 1994-1999. There is a problem in some BIOSes (almost all
Award BIOSes made between 4/26/94 and 5/31/95) wherein they are unable
to deal with years after 1999. If one attempts to set the year-of-century
value to something less than 94 (or 95 in some cases), the value that
actually gets set is 94 (or 95). Thus, if you have one of these machines,
hwclock cannot set the year after 1999 and cannot use the value of the clock as
the true time in the normal way.
To compensate for this (without your getting a BIOS update, which would definitely be preferable), always use --badyear if you have one of these machines. When hwclock knows its working with a brain-damaged clock, it ignores the year part of the Hardware Clock value and instead tries to guess the year based on the last calibrated date in the adjtime file, by assuming that that date is within the past year. For this to work, you had better do a hwclock --set or hwclock --systohc at least once a year!
Though hwclock ignores the year value when it reads the Hardware Clock, it sets the year value when it sets the clock. It sets it to 1995, 1996, 1997, or 1998, whichever one has the same position in the leap year cycle as the true year. That way, the Hardware Clock inserts leap days where they belong. Again, if you let the Hardware Clock run for more than a year without setting it, this scheme could be defeated and you could end up losing a day.
hwclock warns you that you probably need --badyear whenever it finds your Hardware Clock set to 1994 or 1995.
|--srm||This option is equivalent to --epoch=1900 and is used to specify the most common epoch on Alphas with SRM console.|
|--arc||This option is equivalent to --epoch=1980 and is used to specify the most common epoch on Alphas with ARC console (but Ruffians have epoch 1900).|
These two options specify what kind of Alpha machine you have. They
are invalid if you dont have an Alpha and are usually unnecessary
if you do, because
hwclock should be able to determine by itself what its
running on, at least when
/proc is mounted.
(If you find you need one of these options to make
hwclock work, contact the maintainer to see if the program can be improved
to detect your system automatically. Output of hwclock --debug
and cat /proc/cpuinfo may be of interest.)
--jensen means you are running on a Jensen model.
--funky-toy means that on your machine, one has to use the UF bit instead of the UIP bit in the Hardware Clock to detect a time transition. "Toy" in the option name refers to the Time Of Year facility of the machine.
|--test||Do everything except actually updating the Hardware Clock or anything else. This is useful, especially in conjunction with --debug, in learning about hwclock.|
Display a lot of information about what
hwclock is doing internally. Some of its function is complex and this output
can help you understand how the program works.
There are two main clocks in a Linux system:
The Hardware Clock: This is a clock that runs independently of any control program running in the CPU and even when the machine is powered off.
On an ISA system, this clock is specified as part of the ISA standard. The control program can read or set this clock to a whole second, but the control program can also detect the edges of the 1 second clock ticks, so the clock actually has virtually infinite precision.
This clock is commonly called the hardware clock, the real time clock, the RTC, the BIOS clock, and the CMOS clock. Hardware Clock, in its capitalized form, was coined for use by hwclock because all of the other names are inappropriate to the point of being misleading.
The System Time: This is the time kept by a clock inside the Linux kernel and driven by a timer interrupt. (On an ISA machine, the timer interrupt is part of the ISA standard). It has meaning only while Linux is running on the machine. The System Time is the number of seconds since 00:00:00 January 1, 1970 UTC (or more succinctly, the number of seconds since 1969). The System Time is not an integer, though. It has virtually infinite precision.
The System Time is the time that matters. The Hardware Clocks basic purpose in a Linux system is to keep time when Linux is not running. You initialize the System Time to the time from the Hardware Clock when Linux starts up, and then never use the Hardware Clock again. Note that in DOS, for which ISA was designed, the Hardware Clock is the only real time clock.
It is important that the System Time not have any discontinuities such as would happen if you used the date(1L) program to set it while the system is running. You can, however, do whatever you want to the Hardware Clock while the system is running, and the next time Linux starts up, it will do so with the adjusted time from the Hardware Clock. You can also use the program adjtimex(8) to smoothly adjust the System Time while the system runs.
A Linux kernel maintains a concept of a local timezone for the system. But dont be misled -- almost nobody cares what timezone the kernel thinks it is in. Instead, programs that care about the timezone (perhaps because they want to display a local time for you) almost always use a more traditional method of determining the timezone: They use the TZ environment variable and/or the /usr/share/zoneinfo directory, as explained in the man page for tzset(3). However, some programs and fringe parts of the Linux kernel such as filesystems use the kernel timezone value. An example is the vfat filesystem. If the kernel timezone value is wrong, the vfat filesystem will report and set the wrong timestamps on files.
hwclock sets the kernel timezone to the value indicated by TZ and/or /usr/share/zoneinfo when you set the System Time using the --hctosys option.
The timezone value actually consists of two parts: 1) a field tz_minuteswest indicating how many minutes local time (not adjusted for DST) lags behind UTC, and 2) a field tz_dsttime indicating the type of Daylight Savings Time (DST) convention that is in effect in the locality at the present time. This second field is not used under Linux and is always zero. (See also settimeofday(2).)
hwclock Uses many different ways to get and set Hardware Clock values. The most normal way is to do I/O to the device special file /dev/rtc, which is presumed to be driven by the rtc device driver. However, this method is not always available. For one thing, the rtc driver is a relatively recent addition to Linux. Older systems dont have it. Also, though there are versions of the rtc driver that work on DEC Alphas, there appear to be plenty of Alphas on which the rtc driver does not work (a common symptom is hwclock hanging).
On older systems, the method of accessing the Hardware Clock depends on the system hardware.
On an ISA system, hwclock can directly access the "CMOS memory" registers that constitute the clock, by doing I/O to Ports 0x70 and 0x71. It does this with actual I/O instructions and consequently can only do it if running with superuser effective userid. (In the case of a Jensen Alpha, there is no way for hwclock to execute those I/O instructions, and so it uses instead the /dev/port device special file, which provides almost as low-level an interface to the I/O subsystem).
This is a really poor method of accessing the clock, for all the reasons that user space programs are generally not supposed to do direct I/O and disable interrupts. Hwclock provides it because it is the only method available on ISA and Alpha systems which dont have working rtc device drivers available.
On an m68k system, hwclock can access the clock via the console driver, via the device special file /dev/tty1.
hwclock tries to use /dev/rtc. If it is compiled for a kernel that doesnt have that function or it is unable to open /dev/rtc, hwclock will fall back to another method, if available. On an ISA or Alpha machine, you can force hwclock to use the direct manipulation of the CMOS registers without even trying /dev/rtc by specifying the --directisa option.
The Hardware Clock is usually not very accurate. However, much of its inaccuracy is completely predictable - it gains or loses the same amount of time every day. This is called systematic drift. hwclocks "adjust" function lets you make systematic corrections to correct the systematic drift.
It works like this: hwclock keeps a file, /etc/adjtime, that keeps some historical information. This is called the adjtime file.
Suppose you start with no adjtime file. You issue a hwclock --set command to set the Hardware Clock to the true current time. Hwclock creates the adjtime file and records in it the current time as the last time the clock was calibrated. 5 days later, the clock has gained 10 seconds, so you issue another hwclock --set command to set it back 10 seconds. Hwclock updates the adjtime file to show the current time as the last time the clock was calibrated, and records 2 seconds per day as the systematic drift rate. 24 hours go by, and then you issue a hwclock --adjust command. Hwclock consults the adjtime file and sees that the clock gains 2 seconds per day when left alone and that it has been left alone for exactly one day. So it subtracts 2 seconds from the Hardware Clock. It then records the current time as the last time the clock was adjusted. Another 24 hours goes by and you issue another hwclock --adjust. Hwclock does the same thing: subtracts 2 seconds and updates the adjtime file with the current time as the last time the clock was adjusted.
Every time you calibrate (set) the clock (using --set or --systohc ), hwclock recalculates the systematic drift rate based on how long it has been since the last calibration, how long it has been since the last adjustment, what drift rate was assumed in any intervening adjustments, and the amount by which the clock is presently off.
A small amount of error creeps in any time hwclock sets the clock, so it refrains from making an adjustment that would be less than 1 second. Later on, when you request an adjustment again, the accumulated drift will be more than a second and hwclock will do the adjustment then.
It is good to do a hwclock --adjust just before the hwclock --hctosys at system startup time, and maybe periodically while the system is running via cron.
The adjtime file, while named for its historical purpose of controlling adjustments only, actually contains other information for use by hwclock in remembering information from one invocation to the next.
The format of the adjtime file is, in ASCII:
Line 1: 3 numbers, separated by blanks: 1) systematic drift rate in seconds per day, floating point decimal; 2) Resulting number of seconds since 1969 UTC of most recent adjustment or calibration, decimal integer; 3) zero (for compatibility with clock(8)) as a decimal integer.
Line 2: 1 number: Resulting number of seconds since 1969 UTC of most recent calibration. Zero if there has been no calibration yet or it is known that any previous calibration is moot (for example, because the Hardware Clock has been found, since that calibration, not to contain a valid time). This is a decimal integer.
Line 3: "UTC" or "LOCAL". Tells whether the Hardware Clock is set to Coordinated Universal Time or local time. You can always override this value with options on the hwclock command line.
You can use an adjtime file that was previously used with the clock(8) program with hwclock.
You should be aware of another way that the Hardware Clock is kept synchronized in some systems. The Linux kernel has a mode wherein it copies the System Time to the Hardware Clock every 11 minutes. This is a good mode to use when you are using something sophisticated like ntp to keep your System Time synchronized. (ntp is a way to keep your System Time synchronized either to a time server somewhere on the network or to a radio clock hooked up to your system. See RFC 1305).
This mode (well call it "11 minute mode") is off until something turns it on. The ntp daemon xntpd is one thing that turns it on. You can turn it off by running anything, including hwclock --hctosys, that sets the System Time the old fashioned way.
To see if it is on or off, use the command adjtimex --print and look at the value of "status". If the "64" bit of this number (expressed in binary) equal to 0, 11 minute mode is on. Otherwise, it is off.
If your system runs with 11 minute mode on, dont use hwclock --adjust or hwclock --hctosys. Youll just make a mess. It is acceptable to use a hwclock --hctosys at startup time to get a reasonable System Time until your system is able to set the System Time from the external source and start 11 minute mode.
There is some sort of standard that defines CMOS memory Byte 50 on an ISA machine as an indicator of what century it is. hwclock does not use or set that byte because there are some machines that dont define the byte that way, and it really isnt necessary anyway, since the year-of-century does a good job of implying which century it is.
If you have a bona fide use for a CMOS century byte, contact the hwclock maintainer; an option may be appropriate.
Note that this section is only relevant when you are using the "direct ISA" method of accessing the Hardware Clock.
Copyright © tutorialspoint.com