Unix - File System Basics
A file system is a logical collection of files on a partition or disk. A partition is a container for information and can span an entire hard drive if desired.
Your hard drive can have various partitions which usually contains only one file system, such as one file system housing the / file system or another containing the /home file system.
One file system per partition allows for the logical maintenance and management of differing file systems.
Everything in Unix is considered to be a file, including physical devices such as DVD-ROMs, USB devices, floppy drives, and so forth.
Unix uses a hierarchical file system structure, much like an upside-down tree, with root (/) at the base of the file system and all other directories spreading from there.
A UNIX filesystem is a collection of files and directories that has the following properties −
It has a root directory (/) that contains other files and directories.
Each file or directory is uniquely identified by its name, the directory in which it resides, and a unique identifier, typically called an inode.
By convention, the root directory has an inode number of 2 and the lost+found directory has an inode number of 3. Inode numbers 0 and 1 are not used. File inode numbers can be seen by specifying the -i option to ls command.
It is self contained. There are no dependencies between one filesystem and any other.
The directories have specific purposes and generally hold the same types of information for easily locating files. Following are the directories that exist on the major versions of Unix −
|/||This is the root directory which should contain only the directories needed at the top level of the file structure.|
|/bin||This is where the executable files are located. They are available to all user.|
|/dev||These are device drivers.|
|/etc||Supervisor directory commands, configuration files, disk configuration files, valid user lists, groups, ethernet, hosts, where to send critical messages.|
|/lib||Contains shared library files and sometimes other kernel-related files.|
|/boot||Contains files for booting the system.|
|/home||Contains the home directory for users and other accounts.|
|/mnt||Used to mount other temporary file systems, such as cdrom and floppy for the CD-ROM drive and floppy diskette drive, respectively|
|/proc||Contains all processes marked as a file by process number or other information that is dynamic to the system.|
|/tmp||Holds temporary files used between system boots|
|/usr||Used for miscellaneous purposes, or can be used by many users. Includes administrative commands, shared files, library files, and others|
|/var||Typically contains variable-length files such as log and print files and any other type of file that may contain a variable amount of data|
|/sbin||Contains binary (executable) files, usually for system administration. For example fdisk and ifconfig utlities.|
|/kernel||Contains kernel files|
Navigating the File System
Now that you understand the basics of the file system, you can begin navigating to the files you need. The following are commands you'll use to navigate the system −
|cat filename||Displays a filename.|
|cd dirname||Moves you to the directory identified.|
|cp file1 file2||Copies one file/directory to specified location.|
|file filename||Identifies the file type (binary, text, etc).|
|find filename dir||Finds a file/directory.|
|head filename||Shows the beginning of a file.|
|less filename||Browses through a file from end or beginning.|
|ls dirname||Shows the contents of the directory specified.|
|mkdir dirname||Creates the specified directory.|
|more filename||Browses through a file from beginning to end.|
|mv file1 file2||Moves the location of or renames a file/directory.|
|pwd||Shows the current directory the user is in.|
|rm filename||Removes a file.|
|rmdir dirname||Removes a directory.|
|tail filename||Shows the end of a file.|
|touch filename||Creates a blank file or modifies an existing file.s attributes.|
|whereis filename||Shows the location of a file.|
|which filename||Shows the location of a file if it is in your PATH.|
You can use Manpage Help to check complete syntax for each command mentioned here.
The df Command
The first way to manage your partition space is with the df (disk free) command. The command df -k (disk free) displays the disk space usage in kilobytes, as shown below −
$df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/vzfs 10485760 7836644 2649116 75% / /devices 0 0 0 0% /devices $
Some of the directories, such as /devices, shows 0 in the kbytes, used, and avail columns as well as 0% for capacity. These are special (or virtual) file systems, and although they reside on the disk under /, by themselves they do not take up disk space.
The df -k output is generally the same on all Unix systems. Here's what it usually includes −
|Filesystem||The physical file system name.|
|kbytes||Total kilobytes of space available on the storage medium.|
|used||Total kilobytes of space used (by files).|
|avail||Total kilobytes available for use.|
|capacity||Percentage of total space used by files.|
|Mounted on||What the file system is mounted on.|
You can use the -h (human readable) option to display the output in a format that shows the size in easier-to-understand notation.
The du Command
The du (disk usage) command enables you to specify directories to show disk space usage on a particular directory.
This command is helpful if you want to determine how much space a particular directory is taking. Following command would display number of blocks consumed by each directory. A single block may take either 512 Bytes or 1 Kilo Byte depending on your system.
$du /etc 10 /etc/cron.d 126 /etc/default 6 /etc/dfs ... $
The -h option makes the output easier to comprehend −
$du -h /etc 5k /etc/cron.d 63k /etc/default 3k /etc/dfs ... $
Mounting the File System
A file system must be mounted in order to be usable by the system. To see what is currently mounted (available for use) on your system, use this command −
$ mount /dev/vzfs on / type reiserfs (rw,usrquota,grpquota) proc on /proc type proc (rw,nodiratime) devpts on /dev/pts type devpts (rw) $
The /mnt directory, by Unix convention, is where temporary mounts (such as CD-ROM drives, remote network drives, and floppy drives) are located. If you need to mount a file system, you can use the mount command with the following syntax −
mount -t file_system_type device_to_mount directory_to_mount_to
For example, if you want to mount a CD-ROM to the directory /mnt/cdrom, for example, you can type −
$ mount -t iso9660 /dev/cdrom /mnt/cdrom
This assumes that your CD-ROM device is called /dev/cdrom and that you want to mount it to /mnt/cdrom. Refer to the mount man page for more specific information or type mount -h at the command line for help information.
After mounting, you can use the cd command to navigate the newly available file system through the mountpoint you just made.
Unmounting the File System
To unmount (remove) the file system from your system, use the umount command by identifying the mountpoint or device
For example, to unmount cdrom, use the following command −
$ umount /dev/cdrom
The mount command enables you to access your file systems, but on most modern Unix systems, the automount function makes this process invisible to the user and requires no intervention.
User and Group Quotas
User and group quotas provide the mechanisms by which the amount of space used by a single user or all users within a specific group can be limited to a value defined by the administrator.
Quotas operate around two limits that allow the user to take some action if the amount of space or number of disk blocks start to exceed the administrator defined limits −
Soft Limit − If the user exceeds the limit defined, there is a grace period that allows the user to free up some space.
Hard Limit − When the hard limit is reached, regardless of the grace period, no further files or blocks can be allocated.
There are a number of commands to administer quotas −
|quota||Displays disk usage and limits for a user of group.|
|edquota||This is a quota editor. Users or Groups quota can be edited using this command.|
|quotacheck||Scan a filesystem for disk usage, create, check and repair quota files|
|setquota||This is also a command line quota editor.|
|quotaon||This announces to the system that disk quotas should be enabled on one or more filesystems.|
|quotaoff||This announces to the system that disk quotas should be disabled off one or more filesystems.|
|repquota||This prints a summary of the disc usage and quotas for the specified file systems|
You can use Manpage Help to check complete syntax for each command mentioned here.